• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Authentic Automotive Product Reviewer & Adviser

  • Home
  • Auto Accessories
    • Cold Air Intake
    • Suspension System
    • Brake Rotors
    • Fuel Filter
    • Ignition Coil
    • Car & Truck Battery
  • Tonneau Cover
    • Car Cover
    • Floor Mats
  • Tires
  • DIY & Fix
  • Blog
Home » Tonneau Cover

Best Truck Bed Surf Rod Holders Review for Easy On-the-Go Fishing

Last Update: November 18, 2026 | Post By Patrick Jordan, BSc in Automotive Engineering Technology.
Chief Editor and Technical Writer at AutoExpro

White Ford F-150 on the beach with surf fishing rods standing in a truck bed rod holder

Long surf rods and a pickup bed rarely get along. Toss them in loose, and a slammed tailgate snaps a tip or a sliding cooler crushes a guide. Break them down every trip, and you burn time before you reach the sand. The best truck bed surf rod holders fix both problems by keeping rods upright, separated, and ready to cast.

This category matters more than most truck add-ons. A good surf fishing rod holder for a truck protects gear worth hundreds of dollars, frees bed space for coolers and sand spikes, and keeps rods away from road debris and parking-lot traffic. Most designs install without drilling, so your truck stays completely untouched.

We narrowed the field to five racks that anglers actually buy. Each one is listed on Amazon, and each takes a different approach, from ratcheting cab-wall bars to rail clamps. We compared rod fit, build, adjustability, and reported problems, then leaned on buyer feedback from retailers and forums. Here are the strongest options for hauling surf rods safely to the beach.

🏆 Editor’s Top Pick

Portarod Inshore 5 Rod Holder for Truck Bed

Portarod Inshore 5 rod truck bed rack with adjustable aluminum barThe Inshore 5 gives surf anglers the best balance of capacity, fit, and price. Its ratcheting bar locks against both bed walls without drilling, and a reviewer carries 12-foot rods on beach runs with it. It earns the top spot for flexibility across truck sizes.

  • Five padded rod tubes
  • 53″ to 84″ ratcheting bar
  • No drilling required
  • Adjustable angle and spacing

Check Price on Amazon

Top 5 Truck Bed Surf Rod Holders Reviews

1. Portarod Inshore 5 Rod Holder — Best Overall for Surf Rods

Portarod Inshore 5 rod truck bed rack with adjustable aluminum bar and five rod tubes

The Portarod Inshore 5 is an aluminum crossbar that ratchets tight between your bed walls and holds five rods in 19-inch tubes. It targets anglers who haul several surf or inshore rods and want an open bed. The pressure mount needs no drilling, so setup takes minutes.

One buyer carried 7- to 12-foot surf rods on North Carolina beaches without trouble. Another found the tubes can swivel, so rods may drift toward the tailgate. Check your bed width first, because the bar spans 53 to 84 inches.

Key Features

  • Ratcheting Crossbar — expands 53″ to 84″ and locks against bed walls without drilling.
  • Five Rod Tubes — 19 inches long with a 1.77-inch inner diameter for thick butts.
  • Adjustable Angle — tilt rods and slide tubes to clear coolers and the tailgate.
  • Padded Contact Points — rubber pads protect the bed; vinyl caps cushion butts.
  • Weather-Ready Build — aluminum with stainless and galvanized hardware resists salt air.

Why We Recommend It

Choose this rack if you carry up to five rods and want one setup that fits most pickups.

It ranks first because it balances capacity, fit, and price better than anything else here.

Pros

  • Fits beds from 53″ to 84″
  • Installs without drilling
  • Holds five padded rods
  • Adjustable angle and spacing
  • Buyers report 12-foot surf rod use

Cons

  • Tubes can swivel without a ratchet strap
  • Weighs about 10 pounds; locks cost extra

What Customers Say

A DesertCart reviewer hauls four 7- to 12-foot surf rods on North Carolina beaches, and it “held up amazingly.”
StoreYourBoard shoppers rate it 4.59 out of 5 across 41 reviews.

Buy from amazon

2. Portarod Offshore 5 Rod Holder — Best Heavy-Duty Pick

Portarod Offshore 5 fishing rod truck bed rack

The Portarod Offshore 5 is the heavy-duty sibling of the Inshore. A thicker 1.476-inch bar stretches from 63 to 89 inches, so it fits full-size and super duty trucks. It suits anglers hauling 12-foot-plus surf rods or big reels who want extra stiffness and a longer span.

One buyer praised how the bar angles rods downward to clear low trees and drive-through windows. Another saw rust within weeks and found thick rod butts did not fit fully. Measure your butts before ordering, and plan for the weight, about 14.6 pounds.

Key Features

  • Heavy-Duty Crossbar — a 1.476-inch aluminum beam stiffens long, heavy rods.
  • 63″ to 89″ Span — ratchets across full-size and super duty beds.
  • Five 19″ Rod Tubes — 1.77-inch inner diameter with cushioning vinyl end caps.
  • Angle Control — pivot rods downward to clear trees and drive-through windows.
  • Rubber Pads — protect bed walls and steady the bar.

Why We Recommend It

Pick the Offshore for a full-size or super duty truck and the longest, heaviest surf rods.

It lands second because it costs and weighs more. Pack a portable air compressor to refill tires after beach driving.

Pros

  • Thick 1.476-inch bar
  • Spans 63″ to 89″
  • Five padded tubes
  • Angles rods downward
  • No drilling required

Cons

  • Heaviest, priciest Portarod rack
  • One buyer reported early rust and tight butt fit

What Customers Say

A DesertCart reviewer calls it “much better than the front or back bumper mounted units” for 12-foot-plus surf rods.
A TacomaWorld member says the Portarod system hauls 12-foot surf rods with no problems at 70 mph.

Buy from amazon

3. Portarod Inshore 4 Rod Holder — Best Value for Smaller Setups

Portarod Inshore rack pressure-mounted across a Ford F-150 bed holding fishing rods

The Portarod Inshore 4 uses the same ratcheting design as its five-rod sibling with one fewer tube. It fits beds from 53 to 84 inches and suits solo anglers or couples who rarely carry more than four rods. Because the bar braces against the bed walls, it leaves the floor open for coolers.

Buyers like how fast it drops in and lifts out. One reviewer wished it included locking cables, and another said the bar can sag under heavy rods. Add a cable lock if you park at crowded beach lots.

Key Features

  • Ratcheting Support Bar — expands 53″ to 84″ to fit nearly any bed.
  • Four Rod Tubes — 19 inches long with cushioning vinyl end caps.
  • Adjustable Setup — change rod angle and space reels apart.
  • Durable Materials — aluminum body, stainless screws, galvanized parts.
  • Removable Design — loosen the ratchet and lift it out.

Why We Recommend It

This is the pick for anglers who want Portarod quality without paying for a fifth tube.

It ranks third only because capacity is limited, though single holders can be added later.

Pros

  • Fits beds from 53″ to 84″
  • No drilling or bolts
  • Adjustable angle and spacing
  • Aluminum with stainless screws
  • Lifts out quickly

Cons

  • Holds only four rods without add-ons
  • One buyer saw sagging under heavy rods

What Customers Say

A DesertCart reviewer who owns several says, “They are good, I use these in all my trucks.”
Another DesertCart buyer found it “Easy to take in and out” and secure.

Buy from amazon

4. Dev Fishing RB 100 — Best Alternative Ratcheting Rack

Ratcheting truck bed rod rack holding rods and reels, shown as a style reference

The Dev Fishing RB 100 is another ratcheting crossbar rack, with four holders and a 55- to 70-inch span. It suits standard beds and anglers wanting an alternative to Portarod. Rubber feet protect the bed walls, and the aluminum build weighs about six pounds.

Feedback is mixed, with roughly 3.7 stars across 93 reviews on the listing data we found. Several buyers said the included bolts were too short, and one said surf rods would not fit the holders. Check your rod butts and keep longer bolts handy.

Key Features

  • Ratcheting Cargo Bar — an all-metal ratchet locks between bed walls.
  • 55″ to 70″ Fit — suits compact and standard pickup beds.
  • Four Rod Holders — space rods apart so reels do not tangle.
  • Rubber Feet — prevent slipping and scratching.
  • Aluminum Build — keeps weight near six pounds.

Why We Recommend It

Consider the RB 100 if your bed measures 55 to 70 inches and you carry lighter rods.

It ranks fourth because fit complaints repeat in reviews, especially thick surf rod butts.

Pros

  • Fits beds from 55″ to 70″
  • Sturdy all-metal ratchet
  • Rubber feet protect the bed
  • Four adjustable holders
  • Light at about six pounds

Cons

  • Buyers report bolts that are too short
  • Openings may be too narrow for surf rods

What Customers Say

A DesertCart reviewer calls it “10 times higher quality than I expected.”
A coastal surf angler on DesertCart is very satisfied, though they wanted rubber grips.

Buy from amazon

5. Brocraft Aluminum Clamp-On Rod Holder — Best Clamp-On Option

Fishing rods standing in a pickup truck bed rod rack beside the water

The Brocraft clamp-on holder takes a different path. A C-clamp grips the bed rail instead of bracing between walls, and bungee cords hold four rods. It suits open beds, anglers carrying shorter rods, and anyone who wants the floor and cab wall free for other gear.

Rail clamps hold rods along the bed side, so very long surf rods may need breaking down. Fit also depends on rail thickness, and trucks with caps or campers may not work. Measure your rail before buying, and keep tips clear of the tailgate.

Key Features

  • C-Clamp Mount — grips rails up to roughly 2.5 inches thick, no drilling.
  • 6061-T6 Aluminum Track — light, rigid, and corrosion-resistant.
  • Bungee Retention — cords keep rods from rattling.
  • Four Rod Positions — keeps rods and reels separated.
  • Multi-Use Design — also clamps to boat rails.

Why We Recommend It

Choose this holder if you carry shorter rods and prefer a rail mount.

It ranks fifth because clamp-ons suit very long surf rods less well than cab-wall bars.

Pros

  • Clamps on without drilling
  • Aluminum track resists rust
  • Bungee cords secure rods
  • Leaves the bed floor free
  • Also fits boat rails

Cons

  • Holds four rods; long surf rods may not fit
  • May not fit trucks with caps

What Customers Say

A DesertCart reviewer calls it a “Quality product and easy to use!”
A Rosenberry Rooms roundup lists it at 4.5 stars from 162 ratings.

Buy from amazon

How to Buy the Best Truck Bed Surf Rod Holders

Adjustable ratcheting truck bed rod rack for carrying surf rods

Use these six checks to choose a truck bed surf rod holder that fits your truck, rods, and beach routine.

Build Quality

Look for aluminum tubes, stainless or galvanized hardware, and rubber pads. Salt air eats cheap steel quickly, and one buyer’s early rust shows why. Thicker crossbars, like the 1.476-inch beam on the Offshore, flex less under long rods. Rinse any rack with fresh water after beach trips, and check the ratchet for corrosion.

Performance

One surf angler reported real drag on tall rods at 65 mph, so favor racks with angle adjustment. Tilt tips toward the tailgate, strap them down, and keep them below overhead clearances. Test the rack loaded in your driveway, then shake the rods before every highway run.

Size / Capacity

Match the span to your bed width first. Portarod’s official Inshore page lists a 53 to 84 inch bar, the Offshore covers 63 to 89, and the RB 100 covers 55 to 70. Then count rods. If you run a closed cover, read our tonneau cover or camper shell comparison, because tall rods need clearance.

Ease of Use

Pressure-mount bars lift out in seconds and need no tools, while clamp-ons require a rail measurement first. Whichever you choose, confirm the tubes accept your rod butts and reel seats. One Offshore buyer widened the opening by swapping the slotted end cap from top to bottom.

Warranty & Support

Warranty terms vary by seller, so read the listing before you buy. One Offshore buyer said Portarod quickly sent a replacement part for a ratchet problem. Budget for cable locks too, since most racks do not include them, and a visible rod rack can tempt thieves at crowded beach lots.

Price vs Value

Prices climb with bar thickness and capacity. Clamp-on racks usually cost less, but they carry fewer rods and demand compatible rails. Portarod racks cost more, yet they can serve several trucks over time. Compare current Amazon prices, because they change often.

How to Install, Set Up, and Maintain a Truck Bed Surf Rod Holder

How to Install

Most pressure-mount racks install in minutes. Clear the bed, place the bar against the cab wall, and ratchet it tight. See the video installation guide on StoreYourBoard’s YouTube channel for a visual walkthrough before your first trip.

  • Measure bed width and confirm the rack’s span.
  • Seat the rubber pads against the bed walls, then ratchet until firm.
  • Grab the bar and shake it to confirm it will not shift.

How to Set Up / Tune

Tuning keeps rods safe at speed. Load your actual rods, then adjust spacing and angle before you leave.

  • Slide tubes along the bar until reels clear each other.
  • Tilt tips slightly toward the tailgate and below overhead hazards.
  • Add a ratchet strap or cable lock for extra security.
  • Stow recovery boards flat beside the rack for soft-sand days.

How to Maintain

Salt is the enemy of every rod rack. A few minutes of care after each trip keeps the ratchet moving and the hardware tight.

  • Rinse with fresh water after every beach trip.
  • Dry the ratchet, then lightly lubricate moving parts.
  • Check bolts and end caps monthly for rust or looseness.
  • Store the rack in the garage when you are not fishing.

Frequently Asked Questions

Will a truck bed rod holder fit 12-foot surf rods?

Yes, buyers report using Portarod racks with rods from 7 to over 13 feet. Tilt tips toward the tailgate and check local overhang rules.

Do these racks require drilling?

No. Pressure-mount bars ratchet between bed walls, and clamp-on holders grip the rail. Both come out when you need the bed.

Can I use one with a tonneau cover?

It depends. Tall rods need open clearance, and several clamp-on holders list incompatibility with bed covers. Measure before ordering.

Do rods in the bed hurt gas mileage?

Tall rods catch wind, and one buyer noted real drag at 65 mph. Our guide to better gas mileage in a truck has more tips.

How do I stop my rod rack from being stolen?

Portarod sells cable locks separately, and one buyer warned that anyone can lift an unlocked rack. Remove it overnight.

Final Conclusion

The best truck bed surf rod holders keep expensive rods protected, organized, and ready for the beach. Our top choice is the Portarod Inshore 5, which balances capacity, fit, and price for most pickups. It installs without drilling and handles long surf rods well.

If you drive a full-size or super duty truck, the Portarod Offshore 5 adds stiffness for heavier rods. Smaller setups should look at the Inshore 4, while the Dev Fishing RB 100 and Brocraft clamp-on suit specific beds and shorter rods. Always measure your bed, your rod butts, and your tailgate clearance first, because fit decides whether any rack works well for you.

Whichever rack you choose, rinse it after each trip and add a lock. A good setup also pairs well with other truck upgrades, like the best running boards. Use the Amazon links above to check current prices and availability, then enjoy easier trips to the surf.

About Patrick Jordan

Patrick Jordan is an SAE Certified expert auto mechanic and car enthusiast with 10 years of practical experience. He has worked in some reputed garage in the USA That has helped him to gather more practical knowledge. Currently working at a major automotive startup company. Experienced in engine repair, vehicle upgrade, car interior, and exterior design management, off-road vehicle maintenance, etc. From reviews to expert solutions, you’ll find almost everything about automotive from him on AutoExpro.com
Follow me on
Twitter: Patrick Jordan
Facebook: Patrick Jordan
Pinterest:Patrick Jordan

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

  • Home
  • About Us
  • Contact Us
  • Privacy Policy
  • Affiliate Disclaimer
  • Terms and Conditions
  • Product Photographer
  • Advertising

COPYRIGHT © 2024 · AUTOEXPRO.COM, ALL RIGHTS RESERVED

AutoExpro is reader-supported. When you buy through links on our site, we may earn an affiliate commission. There is no additional cost to you. However, this does not impact our reviews and comparisons. We try our best to keep things fair and balanced to help you make the best choice.

Prime Day Exclusive Deals

Today only — huge savings on best-selling products. Don’t miss out.

See Today’s Deals As an Amazon Associate I earn from qualifying purchases.