• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Authentic Automotive Product Reviewer & Adviser

  • Home
  • Auto Accessories
    • Cold Air Intake
    • Suspension System
    • Brake Rotors
    • Fuel Filter
    • Ignition Coil
    • Car & Truck Battery
  • Tonneau Cover
    • Car Cover
    • Floor Mats
  • Tires
  • DIY & Fix
  • Blog
Home » Auto Accessories

top 5 Best Slanted Truck Tool Boxes Review : Maximize Storage, Minimize Strain

Last Update: November 22, 2026 | Post By Patrick Jordan, BSc in Automotive Engineering Technology.
Chief Editor and Technical Writer at AutoExpro

Best slanted truck tool boxes for organized, accessible truck and trailer storage

Loose tools slide around, rattle against the bed, and vanish at a busy job site. A slanted truck tool box solves that problem. Its angled or tapered front follows an A-frame tongue or tucks into tight corners where a square chest will not fit. Choosing the best slanted truck tool boxes means matching shape, material, and lock quality to how you tow and haul.

Organized storage saves time and protects expensive gear. Tools stay dry, straps stay untangled, and a lock deters casual theft. A well-placed box also keeps everything within easy reach, so you stop climbing around the trailer to find one wrench. For anyone who tows, works from a flatbed, or hauls tools daily, the right box pays for itself very quickly.

I narrowed the field to five boxes sold on Amazon, using manufacturer specifications, retailer listings, and owner feedback. Each earned its spot for a clear reason: capacity, steel strength, light weight, or compact aluminum construction. Below you will find strengths, honest drawbacks, and buying advice. Prices and stock change often, so confirm details on each listing. For covered-bed ideas, read our toolbox canopy upgrade guide.

🏆 Editor’s Top Pick

Buyers Products 1701380 Diamond Tread Aluminum Trailer Tongue Box

 

Buyers Products 1701380 slanted aluminum tongue box

Made in the USA from 0.056-inch diamond tread aluminum, this tapered-front box fits A-frame tongues, locks with a stainless paddle latch, and balances capacity, weight, and value better than any other pick here.

  • Made in the USA
  • Tapered A-frame fit
  • Two-key paddle latch
  • Sealed continuous hinge

Check Price on Amazon

Top 5 Slanted Truck Tool Boxes Reviews

1. Buyers Products 1701380 — Best Overall Slanted Tool Box

Buyers Products 1701380 diamond tread aluminum trailer tongue box

The Buyers Products 1701380 is a 35-inch aluminum tongue box with a tapered front that follows an A-frame trailer. Contractors, landscapers, and weekend haulers will like its locking storage ahead of the cargo area. Retailer listings put capacity near 4.4 cubic feet, enough for chains, straps, and hand tools.

Using it is simple: mount it, lock it, and leave it. Owners praise the latch and finish, though a few mention thin seams and sharp inner edges. Mounting hardware varies by trailer, so budget for your own bolts and backing plates before installation day.

Key Features

  • Tapered Front — follows the A-frame so the box sits flush.
  • 0.056-Inch Aluminum — corrosion-resistant diamond tread stays light.
  • Paddle Latch Lock — stainless steel latch ships with two keys.
  • Continuous Hinge — a lid cable prevents slamming and hinge damage.
  • Weather Seals — seals keep moisture and dirt out.

Why We Recommend It

Choose it for proven US-made aluminum, a dependable lock, and a tapered shape that suits most A-frame trailers.

It ranks first because no rival balances size, security, and fit as well.

Pros

  • Made in the USA from aluminum
  • Tapered fit for A-frame tongues
  • Locks with two included keys
  • Continuous hinge with weather seals
  • Light at roughly 18 pounds

Cons

  • Some owners report sharp inner edges
  • One-year warranty per Tractor Supply

What Customers Say

A Tractor Supply reviewer wrote, “The quality of the tongue box is great.”

A Home Depot reviewer of the larger 49-inch Buyers version said the box “was solid and stable.”

Buy from amazon

2. Dee Zee DZ91717P Poly Triangle Trailer Box — Best for Capacity

Dee Zee poly triangle trailer tongue box

The Dee Zee DZ91717P is a poly triangle box measuring 36 by 18.75 by 18 inches and weighing about 25 pounds. It suits campers, landscapers, and utility-trailer owners who want rust-free storage for straps, tarps, and chains. Dee Zee lists six cubic feet, the largest volume in this group.

Installation means drilling four 3/16-inch holes and using the included sheet metal screws. The latch is a steel hasp, so bring your own padlock. Amazon owners call it light-duty but handy, and one warned the open lid leans back several inches.

Key Features

  • Rigid Poly Body — thick plastic resists warping and will not rust.
  • Six Cubic Feet — room for tow ropes, chains, chocks, and a jack.
  • Triangle Shape — tapers to match A-frame tongues.
  • Lightweight Build — about 25 pounds keeps loading easy.
  • Included Hardware — sheet metal screws ship in the box.

Why We Recommend It

Pick this one when volume matters more than theft resistance. It holds more than any other box here.

It ranks second because plastic trades toughness for capacity, and a hasp will not stop a determined thief.

Pros

  • Largest capacity here at six cubic feet
  • Light at roughly 25 pounds
  • Poly body will not rust
  • Mounting screws included
  • Over 1,300 Amazon ratings

Cons

  • Hasp needs your own padlock
  • Some reviewers call it light-duty

What Customers Say

An Amazon reviewer wrote, “I really like this trailer storage box.”

A CARiD reviewer said it was “still working as intended” after two years.

Buy from amazon

3. Montezuma 23 x 14 Steel Triangle Toolbox — Best for Mechanics

Montezuma 23 x 14 steel triangle toolbox with tiered tool storage

Montezuma’s steel Triangle Toolbox stacks sockets, wrenches, and screwdrivers on stepped tiers so every tool stays visible. It measures about 23-3/8 by 13-3/4 by 14-1/2 inches and holds more than 129 tools. Bob Vila’s testers praised its organization and said it works mounted or strapped loose in a truck bed.

It weighs 44.8 pounds, so bolt it down or strap it. In Bob Vila’s car-wash test no water got in, and most tools stayed put after a tip-over. Steel adds strength but can rust if paint chips, so touch up scratches quickly.

Key Features

  • Multi-Tier Layout — steel pegs and stepped tiers keep tools in view.
  • 16-Gauge Steel — rated for 500 pounds including contents.
  • Locking Lid Design — closing the lid pins tools in place.
  • Weather Seal — lid gasket blocks dust and moisture.
  • UV Powder Coat — outdoor-rated paint with a five-year limited warranty.

Why We Recommend It

Mechanics and DIYers who live in sockets will love this layout; nothing hides at the bottom of a deep tray.

It ranks third because it organizes better than it stores bulk, and the weight and price run high.

Pros

  • Tiered display for 129+ tools
  • 16-gauge steel construction
  • Weather-sealed lid
  • Five-year limited warranty
  • Mounts to a vehicle or sits loose

Cons

  • Heavy at 44.8 pounds
  • Costs far more than most aluminum boxes

What Customers Say

Bob Vila tester Glenda Taylor said, “I love all the hooks and pegs in the Montezuma tool box.”

A Tractor Supply reviewer who owns a Montezuma Shopbox called it “Well made.”

Buy from amazon

4. Dee Zee 91716 Triangle Trailer Tool Box — Best Compact Aluminum

Dee Zee 91716 aluminum triangle trailer tool box

The Dee Zee 91716 is the smaller aluminum triangle box in the brand’s lineup. It runs 34 inches along the back, 16 inches across the front, and 18 inches tall, with 3.71 cubic feet inside. It suits small utility trailers and camper tongues where a big box would crowd the frame.

Dee Zee builds it in the USA from .056-inch Brite-Tread aluminum and adds gas shocks so the lid does not slam. Expect to drill the tongue. Amazon showed it near $309 with 3.8 stars from seven ratings, so read recent reviews carefully.

Key Features

  • Brite-Tread Aluminum — .056-inch diamond tread resists rust outdoors.
  • Gas Shock Lid — dampened shocks support the lid without slamming.
  • Two-Key Paddle Handles — stainless steel latches lock securely.
  • 3.71 Cubic Feet — fits helmets, ropes, chains, and tools.
  • Lifetime Warranty — backed by a limited lifetime warranty.

Why We Recommend It

Choose it for a short tongue and a US-made aluminum shell in a smaller, easier-to-mount size.

It ranks fourth because the price is high for 3.71 cubic feet and the rating pool is small.

Pros

  • US-made Brite-Tread aluminum
  • Limited lifetime warranty
  • Gas shock lid support
  • Two keys included
  • Compact 3.71-cubic-foot size

Cons

  • Only seven Amazon ratings so far
  • Pricey for the capacity

What Customers Say

An Amazon reviewer wrote, “Good quality as you expect from a Dee Zee product.”

An etrailer buyer of the larger Dee Zee aluminum triangle box said, “Well made box.”

Buy from amazon

5. Dee Zee DZ92717 60-Degree Triangle Box — Best Low-Profile Slant

Dee Zee DZ92717 60-degree low-profile triangle trailer box

The DZ92717 flattens the triangle into a 60-degree wedge only 8.25 inches tall. It measures 32.8 inches along the back and 24.5 inches wide, with about three cubic feet inside. It suits trailers with limited vertical room or awkward leftover corners.

Dee Zee builds it in the USA from Brite-Tread aluminum, with lockable paddle handles and a dampened gas shock. It weighs about 18 pounds. Capacity is modest, so plan on straps, chains, and hand tools, and verify your tongue dimensions before drilling.

Key Features

  • 60-Degree Wedge — the sharper angle fits narrow corners.
  • 8.25-Inch Height — a low silhouette stays out of the way.
  • Lightweight Aluminum — about 18 pounds of rust-free metal.
  • Locking Paddle Handles — two keys deter casual theft.
  • Gas Shock Support — holds the lid open while you dig.

Why We Recommend It

Buy this when height is your limiting factor; it turns a leftover corner into lockable storage.

It ranks fifth because three cubic feet is tight and model-specific Amazon feedback is thin.

Pros

  • Only 8.25 inches tall
  • Roughly 18 pounds
  • US-made Brite-Tread aluminum
  • Gas shock lid support
  • Limited lifetime warranty

Cons

  • Just three cubic feet of space
  • Little verified Amazon feedback for this exact model

What Customers Say

A TruckID reviewer wrote, “Great value. Easy installation. I’m very pleased.”

An eBay reviewer of Dee Zee’s poly triangle box said, “Good box for the money.”

Buy from amazon

How to Buy the Best Slanted Truck Tool Boxes

Open aluminum truck tool box showing interior storage space

Slanted boxes look similar but behave differently. Use these checkpoints before you click buy, so the box fits your tongue, your load, and your budget.

Build Quality

Aluminum resists rust and keeps weight low, while steel adds stiffness and takes abuse. Poly avoids rust entirely but flexes under load. Check metal gauge, since 0.056-inch aluminum is common in this category. Look for continuous hinges, tight seams, and gasket seals, and inspect the box on arrival because owners report seam quality can vary.

Performance

A good box stays dry and locked down on the highway. Seals, lid cables, and gas shocks matter more than a glossy finish. Bob Vila’s car-wash test is a useful benchmark, and the sealed boxes it tested kept water out. For security, prefer a keyed paddle latch over a bare hasp.

Size / Capacity

Measure the tongue length, width, and lid clearance before shopping. A tapered front helps, but a lid that hits the coupler is a wasted purchase. Compare cubic feet, not just length. If you also plan a bed cover, read our tonneau cover versus camper shell comparison first.

Ease of Use

Most slanted boxes mount by drilling through the base, and few include premium hardware. Plan for backing plates and sealant. Manufacturers such as Dee Zee publish Dee Zee installation guides for each model. A light box is a one-person job, though a helper makes alignment easier.

Warranty & Support

Warranties vary widely. Dee Zee advertises a limited lifetime warranty on its triangle boxes, Montezuma lists five years, and Tractor Supply lists one year for the Buyers box. Review the Buyers Products tongue box specs, save your receipt, and photograph your install in case you ever file a claim.

Price vs Value

Cost per cubic foot reveals real value, but fit should outrank price. Weigh material, warranty, and lock quality together. If you are planning a bigger build, browse our list of top truck accessory upgrades. Always confirm the live Amazon price and shipping before ordering.

How to Install, Set Up, and Maintain a Slanted Truck Tool Box

How to Install

Most slanted boxes mount by drilling through the base into the tongue or bed. Measure twice, because mistakes are permanent. Quadratec estimates under an hour for a Dee Zee triangle box. For a visual walkthrough, see the video installation guide.

  • Mark mounting points with the lid closed, then fully open.
  • Check for brake lines, wiring, and fuel lines before drilling.
  • Use supplied screws or bolts with backing plates.
  • Seal drilled holes, then test the latch and lid swing.

How to Set Up / Tune

Setup is mostly organization. A tidy layout speeds every job and stops tools from rattling. Keep tongue weight in mind, since a heavy load adds pounds to the hitch. Then lock the box and test the latch before you tow.

  • Place heavy tools low and near the box floor’s center.
  • Use small bins or tool rolls to stop sliding.
  • Add foam or rubber strips between metal brackets and aluminum frames.
  • Keep spare keys somewhere other than the trailer.

How to Maintain

A few minutes each season prevents rust and sticky latches. Wash away road salt, check the seals, and inspect the mounting hardware. Small habits protect both the box and the tools inside it for years.

  • Rinse salt and grime, then dry the gasket.
  • Lightly lubricate hinges and locks.
  • Touch up chipped powder coat on steel boxes.
  • Retighten mounting hardware after the first few trips.

Frequently Asked Questions

What is a slanted truck tool box?

It is a lockable storage box with an angled, tapered, or triangular profile. The shape fits A-frame trailer tongues and tight corners. Most Amazon options mount by drilling and open from the top.

Are slanted tool boxes waterproof?

Many use lid gaskets and continuous hinges, but few makers promise full waterproofing. Bob Vila’s car-wash test showed sealed boxes staying dry. Still, bag electronics and inspect seals every season.

Can a slanted tool box sit inside a truck bed?

Some can. Bob Vila says Montezuma’s triangle box works mounted or unmounted with straps. Tongue boxes need a flat mounting area and lid clearance. For extra carrying space, see our roof box and rack guide.

Will a slanted box clear a tonneau cover?

Measure box height against your cover before buying. Tongue boxes mount on trailers, so a bed cover rarely matters there. For bed installs, compare covers in our Peragon tonneau cover reviews.

How much weight can slanted boxes hold?

Ratings vary. Montezuma lists 500 pounds, including contents. Reviewers call Dee Zee’s poly box light-duty, so check each manufacturer’s rating and your trailer’s tongue weight limit before loading heavy gear.

Final Conclusion

The best slanted truck tool boxes turn awkward tongue space into secure, organized storage. The Buyers Products 1701380 leads for most people thanks to US-made aluminum, a tapered fit, and a reliable locking latch. It delivers strong all-around value without unnecessary extras or complicated installation.

Choose the Dee Zee poly box for capacity, Montezuma for organization, the Dee Zee 91716 for compact aluminum, or the DZ92717 when height is tight. Every pick comes from a live Amazon listing, so confirm the current price and fitment before you buy.

Match the box to your tongue, your load, and your budget, then install it carefully and maintain it each season. To finish your setup, check our best running boards guide for another smart truck upgrade. Your tools will stay safer, drier, and far easier to find.

About Patrick Jordan

Patrick Jordan is an SAE Certified expert auto mechanic and car enthusiast with 10 years of practical experience. He has worked in some reputed garage in the USA That has helped him to gather more practical knowledge. Currently working at a major automotive startup company. Experienced in engine repair, vehicle upgrade, car interior, and exterior design management, off-road vehicle maintenance, etc. From reviews to expert solutions, you’ll find almost everything about automotive from him on AutoExpro.com
Follow me on
Twitter: Patrick Jordan
Facebook: Patrick Jordan
Pinterest:Patrick Jordan

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

  • Home
  • About Us
  • Contact Us
  • Privacy Policy
  • Affiliate Disclaimer
  • Terms and Conditions
  • Product Photographer
  • Advertising

COPYRIGHT © 2024 · AUTOEXPRO.COM, ALL RIGHTS RESERVED

AutoExpro is reader-supported. When you buy through links on our site, we may earn an affiliate commission. There is no additional cost to you. However, this does not impact our reviews and comparisons. We try our best to keep things fair and balanced to help you make the best choice.