
Extra fuel is peace of mind until it starts rattling, leaking, or sliding around on a trailer tongue. Good MOLLE gas can mounts fix that. They lock a can to a rigid panel, so fuel rides secure, stays reachable, and never eats cargo space inside your truck or camper.
The catch is fit. MOLLE slot spacing varies by panel brand, and not every bracket suits every can. Some mounts hold a RotopaX-style pack, others a jerry can tray. Picking wrong means drilling new holes, adding spacers, or living with a mount that does not suit your build. Plan before you buy.
We compared five picks for trailers and vehicle panels using listing specs, manufacturer pages, and owner feedback. Each review states what the mount fits and where it falls short. Planning a bigger build? Our roundup of top vehicle upgrades covers other accessories worth adding to the same rig.
As an Amazon Associate, we earn from qualifying purchases. This costs you nothing extra.
🏆 Editor’s Top Pick
TACMOLLE Gas Can Mount for Rigid MOLLE Panels

The TACMOLLE holder is the simplest way to hang a gas can on a rigid MOLLE panel. A twist-in base and T-lock handle lock the can down, and the coated aluminum alloy body resists rust. Confirm your panel’s slot spacing first.
- Fits 1–1.7 inch MOLLE slots
- Double base with T-lock handle
- Aluminum alloy, anti-rust coating
- Twist-in install and removal
⚡ Quick Picks
Top 5 MOLLE Gas Can Mount Reviews
#1 BEST OVERALL
1. TACMOLLE Gas Can Mount — Best Overall Holder

The TACMOLLE mount is a compact aluminum holder that clamps a standard gas or water can to a rigid MOLLE panel. It suits truck beds, window panels, and any rigid MOLLE surface with matching slots. Its double base and T-lock secure the can. Check slot spacing first, because one owner needed spacers to sit flush, and another found it loose on a divider.
Key Features
- Universal slot fit — fits 1–1.7 inch tactical slots and most MOLLE panels, with spacers that help you adjust the offset.
- Double base, T-lock handle — a double base and T-shaped lock handle hold the can firmly in transit.
- Aluminum alloy build — anti-rust, corrosion-resistant coatings help it handle rain, mud, and road salt on exposed panels.
- Twist-in operation — a simple twist inserts or removes the can, so pulling the can off for a refill is quick.
- Compact, 1.3 pound body — measures about 4 x 4 x 2.8 inches, leaving room on small panels.
Pros
- Solid metal construction
- Spacers help fine-tune fit
- Locking T-handle design
Cons
- Fit varies by panel brand
- One owner reported rattling
- Gas can sold separately
What Owners Say
A desertcart reviewer called it “so much better than those cheap plastic mounts.” A reviewer on Amazon’s UK page said it “doesn’t feel secure” on a Cybertruck divider panel.
#2 BEST FOR TRAILERS
2. Rago Universal MOLLE Panel RotopaX Mount — Best for Trailers

Rago’s plate bridges a RotopaX pack mount to a MOLLE panel, so you can bolt a slim fuel or water pack onto trailers, bed panels, or garage walls. It fits all RotopaX sizes if panel space allows. The RotopaX mount and T-handle are sold separately, so budget for both before checkout. Made in the USA with a black powder coat.
Key Features
- Low-profile fitment — Rago lists a low-profile fitment, so the tank sits close to the panel.
- Fits all RotopaX sizes — Rago says it accepts every RotopaX tank size, as long as panel space allows.
- Works beyond Rago panels — confirmed on ADD and DV8 panels, and listed as universal for trailers and garages.
- Hardware included — mounting hardware comes in the box, though some builds may need different bolts.
- Powder-coated steel — a two-stage hammer black powder coat finishes the steel plate for outdoor use.
Pros
- Built with trailers and garages in mind
- Accepts all RotopaX tank sizes
- Made in the USA, one-year warranty
Cons
- RotopaX mount and T-handle not included
- Needs compatible MOLLE slot spacing
- RotopaX packs cost more per gallon than jerry cans
What Owners Say
An Overland Bound forum member comparing RotopaX packs with jerry cans said you pay for the “convenience of mounting them pretty much anywhere you can.”
#3 BEST STAINLESS OPTION
3. JVWKPU Universal MOLLE Panel Mount — Best Stainless Option

This JVWKPU bracket acts as a bridge between a vehicle MOLLE panel and RotopaX-style fuel or water tank mounting hardware. Its low-profile design and 304 stainless steel construction suit exposed trailer or bed panels. You supply the pack and its mount. The listing gives few dimensions or hardware details, so measure your slot pattern and tank mount before ordering.
Key Features
- 304 stainless steel — the listing names 304 stainless, a grade known for resisting rust outdoors.
- Low-profile bracket — designed to sit close to the panel instead of projecting far from it.
- RotopaX compatibility — listed as compatible with RotopaX fuel cans and water tanks, using the pack’s own mounting hardware.
- Universal MOLLE design — marketed as universal for overland MOLLE panel storage, not tied to one vehicle make or model.
Pros
- Stainless construction for wet or salty climates
- Universal, not vehicle-specific
- Compact low-profile shape
Cons
- Few published specs or load ratings
- Tank mount hardware sold separately
- Owner reviews not verified
What Owners Say
We could not verify owner reviews for this bracket, so treat the specs above as listing claims. Compare it against Rago’s plate if you want a better-documented option.
#4 BEST FOR JEEP JL/JT
4. JOYTUTUS Passenger Door MOLLE Panel — Best for Jeep JL/JT

Built for 2018–2026 Wrangler JL and Gladiator JT owners, this JOYTUTUS panel mounts outside the passenger door and doubles as a MOLLE surface and a jerry can holder. The kit includes the panel, a can tray, and a tension rope. It fits only those Jeeps, so skip it for trailers. Check rear visibility before committing to a side-mounted can.
Key Features
- Jeep-specific fit — listed for 2018–2026 Wrangler JL and Gladiator JT, so it targets those door panels.
- Dual-use design — works as a MOLLE panel for accessories or as a holder for a jerry can.
- Tray and rope included — the kit ships with a jerry can tray and a tension rope to secure the can.
- Passenger-side position — mounts on the passenger side door exterior, keeping cargo space inside the Jeep free.
Pros
- Purpose-built Jeep fit
- Tray and rope included
- Doubles as MOLLE storage
Cons
- Fits only JL and JT models
- Not usable on trailers
- Side-mounted can may affect rear view
What Owners Say
Posters on The INEOS Forum have raised rear-visibility concerns about cans on side panels. That concern is worth weighing before you mount a can beside your window line.
#5 BEST FOR SPARE TIRES
5. Universal Quick Release Spare Tire MOLLE Mount — Best for Spare Tires

This universal mount attaches a MOLLE panel to a spare tire with a ratchet strap, giving you a place to carry a fuel can or traction boards. The listing says it fits 30- to 40-inch tires and includes the strap, hardware, and a manual. It needs a spare tire, so it is useless on bare panels. Trailers with a rear-mounted spare suit it best.
Key Features
- Quick-release design — the listing calls it quick release, which should simplify removing the panel at camp.
- Fits 30–40 inch tires — the listed range covers many full-size spares; measure your tire before ordering.
- Ratchet strap included — the supplied ratchet strap handles the tire attachment, so you do not source your own.
- Complete hardware kit — screws, nuts, and a detailed installation manual are included, per the listing.
- Carries fuel or boards — the listing pitches it for jerry cans and traction boards, covered in our recovery board comparison.
Pros
- Uses an existing spare tire as the anchor
- Strap and hardware included
- Also carries traction boards
Cons
- Requires a spare tire
- Maker and load rating unclear in the listing
- Tire must fall within 30–40 inches
What Owners Say
We could not verify owner reviews for this mount. Check the load rating with the seller, since a full can adds substantial weight to a tire-mounted panel.
MOLLE Gas Can Mounts Buying Guide

Match Your Panel
Start with your panel. MOLLE gas can mounts only work when slot spacing, slot width, and panel thickness match the bracket. TACMOLLE lists 1–1.7 inch slots, while Rago confirms fit on Rago, ADD, and DV8 panels. Measure first, then order.
Match Your Can
Match the mount to your container. Some mounts hold a standard 2-gallon can, others need a RotopaX tank mount, and jerry can trays suit larger steel or plastic cans. Overland Expo notes that cans from U.S. retailers usually meet safety specs.
Plan for Weight
Weight matters more than most buyers expect. Gasoline weighs about six pounds per gallon, so a full 5-gallon can nears 30 pounds. 4WDrive magazine puts a full 20-liter can near 14 kg. Check the panel’s load rating, not just the mount’s.
Pick Weatherproof Materials
Material and coating decide longevity. Aluminum alloy, powder-coated steel, and 304 stainless all resist weather in different ways. Salt-belt owners should prefer stainless or well-coated parts. Whatever you choose, rinse brackets after muddy or salty trips and check fasteners for loosening.
Think About Placement
Side panels can block mirrors, and rigid panels can make rear access tough. One Tacoma World poster found vehicle MOLLE panels useless without easy access behind them. Pick a spot you can actually reach, then mount the heaviest can lowest.
How to Mount a Gas Can on a MOLLE Panel
A secure install takes well under an hour with basic hand tools. WrenchLab lists Rago’s plate at 1/5 difficulty and about 15 minutes. Take your time anyway.
Heavy cans do better low than overhead. If your panel has no room, compare roof box and rack options, but remember a full can adds roughly 30 pounds up top.
- 1. Choose the spot. Pick a flat, rigid panel away from exhaust parts, heat shields, and hot brakes. Keep mirrors and lights clear.
- 2. Test fit the bracket. Hold the mount against the slots, confirm spacing, and add any included spacers before tightening anything.
- 3. Secure the hardware. Tighten bolts evenly. One TACMOLLE owner said a 4 mm allen wrench was all the install needed.
- 4. Load the can. Test the setup with a water-filled can first. With fuel, leave room for expansion and vent pressure slowly before opening.
- 5. Recheck on the road. After a short drive, retighten every bolt and confirm the lock holds. Repeat after rough trails.
MOLLE Gas Can Mount FAQs
What is a MOLLE gas can mount?
It is a bracket that bolts to rigid MOLLE panel slots and holds a fuel can in place. Mounts vary: some clamp a standard 2-gallon can, others accept RotopaX hardware or a jerry can tray. Always match the mount to your can.
Can I use these mounts on a trailer?
Yes, if the trailer has a rigid MOLLE panel or you mount one to it. Rago states its plate suits vehicles, trailers, and garages. Vehicle-specific kits, like the JOYTUTUS Jeep panel, will not transfer to trailers.
How much does a full gas can weigh?
Gasoline weighs roughly six pounds per gallon, so a full 5-gallon can approaches 30 pounds. Extra weight can raise fuel use, and our guide to better truck gas mileage covers ways to save fuel. Carry only what your trip needs.
Can I mount a plastic gas can on a MOLLE panel?
Use a fuel-rated can and mount it away from heat. Owners on Overland Bound report that plastic cans build pressure, so vent them slowly before opening. Check your local rules before carrying fuel on public roads.
Will a gas can mount fit any MOLLE panel?
Not always. Slot width and spacing differ between panel makers. One TACMOLLE owner needed spacers, and another drilled new holes to line things up. Measure your panel and compare it with the listing before ordering.
Final Verdict
The best MOLLE gas can mounts match your panel, your can, and your weight limits. For most people, the TACMOLLE holder is the easiest place to start, as long as slot spacing checks out.
Trailer owners should weigh Rago’s plate, since it targets trailers and garages directly. Jeep JL and JT owners can consider the JOYTUTUS door panel. Anyone carrying a spare tire can try the quick-release tire mount. Each fits a different build, so match the mount to your setup.
Measure twice, mount low, and recheck bolts after rough roads. Building out a truck bed next? Our toolbox canopy upgrade guide shows another way to organize gear. Whichever you pick, confirm fit against your panel before you order.
Leave a Reply