
The wrong go kart jackshaft kit can waste a whole weekend. Shaft diameter, chain size, and sprocket bore must all match your clutch, engine, and axle. Miss one detail and the chain jumps, a sprocket slips, or nothing bolts on. This guide sorts popular Amazon kits by chain type and shaft size, so you can order correctly the first time.
A jackshaft sits between your clutch and the rear axle and adds a second gear reduction stage. Your small engine pulls harder from a stop, and the load splits across two shorter chains. That makes the upgrade popular on mini bikes, budget karts, and custom builds where one long chain would struggle to hold proper tension and alignment.
We compared #35 and #40/41/420 kits in 5/8-inch and 3/4-inch shaft sizes, with lengths from 10 to 16 inches. Every pick is a real Amazon listing with a verified ASIN. Planning more power? Check K&N intake horsepower gains first, since extra torque stresses every drivetrain part.
🏆 Editor’s Top Pick
Pinkhatcat 5/8-Inch x 12-Inch Jackshaft Kit
This kit fits the most common builds: a 5/8-inch, 12-inch shaft for #40/41/420 chain. It is a complete kit with bearings and sprockets, costs under $50, and carried an Amazon’s Choice badge when we checked.
- 5/8-inch x 12-inch shaft
- Runs #40/41/420 chain
- Pillow block bearings included
- 8-tooth and 14-tooth sprockets
Top 5 Go Kart Jackshaft Kit Reviews
1. pinkhatcat 5/8-Inch x 12-Inch Kit — Best Overall for #40/41/420 Chain

The pinkhatcat 5/8-inch by 12-inch kit is the all-rounder for builders running #40/41/420 chain. Listings for this kit describe a 12-inch shaft, two pillow block bearings, collars, a keyway, and 8- and 14-tooth sprockets. Amazon showed roughly 4.5 stars and a $44.99 price when we checked.
It suits mini bikes and kart frames wide enough for a 12-inch shaft. One reviewer reported the smallest sprocket cracked during tightening, so snug the set screws gently and add threadlocker. Confirm your clutch and chain size first, because #35 sprockets will not mesh with #40/41 chain.
Key Features
- 5/8-Inch Shaft — fits common 5/8-inch bore sprockets and collars while keeping weight down.
- 12-Inch Length — leaves room for two sprockets, collars, and both bearings on most frames.
- #40/41/420 Chain Support — the heavier chain family many builders choose for torque converter setups.
- Pillow Block Bearings — mounted bearings bolt to your frame and keep the shaft spinning true.
- Two Sprockets — the pair provides the jackshaft’s reduction stage between clutch and axle chains.
Why We Recommend It
Choose this kit if you run #40/41/420 chain and want a proven size. Its 5/8-inch, 12-inch layout fits many builds without custom cutting.
It ranks first for combining Amazon’s Choice status, positive reviewer feedback, and a complete parts list at a fair price.
Pros
- Works with #40/41/420 chain
- Includes pillow block bearings and collars
- Two sprockets in the kit
- Amazon’s Choice badge when checked
- Reviewer praised the metal quality
Cons
- One reviewer’s smallest sprocket cracked while tightening
- Will not fit #35 chain
What Customers Say
Another Amazon reviewer said the kit “works very well” on a mini bike.
2. OEM-GT 3/4-Inch x 10-Inch Kit — Best 3/4-Inch Shaft for #40/41 Chain

This OEM-GT kit steps up to a 3/4-inch by 10-inch shaft for #40/41 chain. The thicker shaft suits builders using 3/4-inch bore clutches and sprockets. The listing includes a collar, 10- and 14-tooth sprockets, two bearing hangers, and two bearings. Amazon Canada shows a 4.3-star average from 28 ratings.
The title mentions sealed bearings, while the description calls them standard, so confirm the bearing type if that matters to you. At 10 inches, the kit fits narrower frames and mini bikes. Grease the bearings regularly; the listing names grease as compatible.
Key Features
- 3/4-Inch x 10-Inch Shaft — a thicker shaft handles more twisting load than a 5/8-inch one.
- #40/41 Chain Fit — pairs with the durable chain many builders choose for heavier use.
- 10T and 14T Sprockets — both have a 3/4-inch ID, so they match the shaft directly.
- 3/16-Inch Keyway — the standard key slot locks sprockets so they cannot spin freely.
- Two Bearing Hangers — bolt-on mounts hold the bearings steady on your frame.
Why We Recommend It
Buy it if your clutch or torque converter uses a 3/4-inch bore and #40/41 chain. You get a stronger shaft in a compact length.
It ranks second because it solves the thicker-shaft need at a reasonable price, though the bearing wording needs checking.
Pros
- Thicker 3/4-inch shaft
- Compact 10-inch length
- Works with #40/41 chain
- Includes a collar and two sprockets
- 4.3-star average on Amazon Canada
Cons
- Listing wording on bearing type is inconsistent
- Ten inches may not clear wider frames
What Customers Say
A DIY Go Karts forum member ranked #40 as “the biggest of the four” common chain sizes.
3. OEM-GT 5/8-Inch x 10-Inch #35 Kit — Best Compact #35 Chain Option

Running #35 chain? This OEM-GT 5/8-inch by 10-inch kit includes a 10-tooth #35 sprocket with a built-in key and a 20-tooth #35 sprocket. It adds two bearing hangers and two sealed precision bearings, and the shaft has a 3/16-inch keyway. It targets compact karts and mini bikes where space is tight.
#35 chain has smaller teeth than #40/41, and the sprockets are not interchangeable. Forum builders say it is common in karting when well aligned. Match your clutch and axle sprockets to #35, and keep alignment tight to protect the chain.
Key Features
- 5/8-Inch x 10-Inch Shaft — a short, light shaft that suits narrow frames.
- #35 Chain Compatibility — a lighter chain size common in karting and minibike builds.
- 10T Built-In Key Sprocket — locks to the shaft without a separate key.
- 20T Second Sprocket — completes the reduction stage in one box.
- Sealed Precision Bearings — the listing describes them as sealed and precision grade.
Why We Recommend It
Pick it for lightweight #35 builds and tight frames. Chasing power? Compare performance ignition coil upgrades too.
It ranks third because #35 builds are a narrower market, but the kit serves that niche well.
Pros
- Includes two #35 sprockets
- Sealed bearings per the listing
- Compact 10-inch shaft
- 3/16-inch keyway
- One sprocket has a built-in key
Cons
- Works only with #35 chain
- The 5/8-inch shaft is lighter than 3/4-inch options
What Customers Say
A DIY Go Karts forum member running #35 on a minibike said “it does fine.”
4. 5/8-Inch x 16-Inch Kit — Best Long Shaft for #40/41 Chain

Wide frames need a longer shaft. This 5/8-inch by 16-inch kit supplies an 8-tooth sprocket with a built-in key, a 14-tooth sprocket, two bearing hangers, two sealed precision bearings, a key, and two collars. It runs #40/41 chain, and the Amazon listing showed $39.99 when we checked.
The extra length gives you room to space sprockets and shift the chain line. That helps on wide custom frames, though it also means more shaft to support and align. Use solid mounts, and trim the shaft for narrower frames.
Key Features
- 5/8-Inch x 16-Inch Shaft — extra length for wide frames and flexible sprocket spacing.
- 8T Built-In Key Sprocket — mounts securely without hunting for a separate key.
- 14T Sprocket — pairs with the 8-tooth unit for the reduction stage.
- Two 5/8-Inch Collars — hold the shaft in position along its length.
- Sealed Precision Bearings — the listing describes them as sealed and precision grade.
Why We Recommend It
Choose it for wide builds that need room to move sprockets around.
It ranks fourth because it solves a narrower problem than shorter kits, yet its price and parts list stay strong.
Pros
- Longest shaft in this roundup
- Includes two collars
- Includes a spare key
- Sealed bearings per the listing
- Priced at $39.99 when checked
Cons
- Long shaft needs solid support and careful alignment
- Too long for narrow frames without trimming
What Customers Say
A Carlson Racing Engines builder on 4cycle.com advised you “get the jackshaft ratio and clutch to work together.”
5. pinkhatcat 5/8-Inch x 14-Inch #35 Kit — Best Mid-Length #35 Option

This pinkhatcat kit pairs a 5/8-inch by 14-inch shaft with #35 chain. Amazon shows a 4.6-star average from six ratings, so the sample is small. The 12-inch sibling lists two pillow block bearings, two collars, 10- and 14-tooth sprockets, and a keyway, which hints at what to expect here.
The 14-inch length suits frames a bit wider than 12 inches. One Vine reviewer of the sibling kit said the machining was rough and needed cleaning, so test fit everything and deburr edges before assembly. Confirm your clutch uses a #35 sprocket before ordering.
Key Features
- 5/8-Inch x 14-Inch Shaft — mid-length stock for frames that outgrow 12 inches.
- #35 Chain Support — lighter chain with smaller teeth, common in karting.
- Pillow Block Bearings — the sibling listing names mounted bearings that bolt to your frame.
- Two Collars — the sibling kit includes shaft collars to stop side movement.
- Category Ranking — Amazon ranked it #203 in Powersports Chain and Sprocket Kits.
Why We Recommend It
Pick it for #35 builds that need a little more width than a 12-inch shaft.
It ranks fifth because of limited reviews, not a weak design.
Pros
- Works with #35 chain
- 14-inch length suits mid-width frames
- 4.6-star Amazon average
- Ranked #203 in its Amazon category
- Matching #35 listing includes pillow blocks
Cons
- Only six ratings so far
- A reviewer of the sibling kit noted rough machining
What Customers Say
A Go Karts R Us forum member called #35 “the standard in Kart racing.”
How to Buy the Best Go Kart Jackshaft Kit

Use these five checks to match any go kart jackshaft kit to your build. Each prevents a common mistake.
Build Quality
Inspect the shaft finish, sprocket teeth, and bearing hardware before you commit. Machined edges should be clean, and sprockets should fit snugly without cracks. One reviewer saw a small sprocket crack during tightening, so torque set screws gently. Sealed bearings and mounted pillow blocks keep dirt out and hold the shaft true.
Chain Size and Performance
Match the kit to your chain first. #35 sprockets only mesh with #35 chain, while #40 chain fits #41 sprockets. Heavier #40/41/420 chain is a common choice for torque converter setups. Browse GTC’s jackshaft kit lineup to see how manufacturers pair bores, teeth, and chain sizes.
Shaft Size and Length
Choose 5/8-inch shafts for lighter builds and 3/4-inch shafts when your clutch or converter uses a 3/4-inch bore. Then measure your frame. Ten and twelve-inch kits suit narrow chassis, while fourteen and sixteen-inch kits give wide frames room for spacing. Sprocket and collar bore must match the shaft diameter exactly.
Ease of Use
Complete kits save time because they bundle bearings, collars, keys, and sprockets. Mounted pillow blocks bolt directly to plates, while loose bearing hangers need more fitting. Straight chains last longer, so read Comet’s motor mount setup guide before you tighten anything permanently.
Price vs Value and Support
Most kits here cost roughly $40 to $50, so price alone should not decide. Compare what each box includes, such as collars, keys, and bearing type. Many listings come from third-party sellers, so check return terms and warranty details on the Amazon page before buying.
How to Install, Set Up, and Maintain Your Jackshaft Kit
How to Install
Mount the shaft so it sits parallel to the rear axle and clears the chassis. See the video installation guide for a similar pillow block layout.
- Mark the shaft centerline on the frame plates.
- Bolt both bearings loosely, then slide the shaft through.
- Fit collars to stop side-to-side movement.
- Tighten the bearing mounts after alignment.
How to Set Up / Tune
Setup decides how long the chains last. Line up each sprocket pair with a straightedge, then set chain slack before you tighten the engine mount. Re-check everything after your first ride.
- Align sprockets with a straightedge or laser tool.
- Leave modest chain slack on both runs.
- Add threadlocker to set screws and keys.
- Count teeth to calculate each stage’s ratio.
How to Maintain
Engine upkeep protects the drivetrain too. Learn ultrasonic carburetor cleaner liquids, and see who makes Polaris oil if you use powersports-rated oil.
- Grease the bearings on a regular schedule.
- Lube chains and check tension every few rides.
- Inspect sprockets for cracks or hooked teeth.
- Retighten set screws and collars.
Frequently Asked Questions
What size jackshaft do I need for a go kart?
Match the shaft diameter to your sprocket bore, usually 5/8-inch or 3/4-inch. Then pick a length that fits between the frame rails with room for collars.
Can I mix #35 and #40 chain on one kit?
No. #35 chain only fits #35 sprockets, and #40 chain fits #41 sprockets. Keep each chain loop on matching sprockets.
Is a 5/8-inch or 3/4-inch jackshaft better?
The 3/4-inch shaft is thicker and suits higher torque. The 5/8-inch shaft is lighter and works well on smaller builds. Your clutch bore usually decides.
How do I calculate gear ratio with a jackshaft?
Divide the driven teeth by the drive teeth for each chain stage. Multiply the two results to get the final ratio between clutch and axle.
Will a jackshaft kit fit small off-road machines?
Kits target go karts and mini bikes, so check frame width and bore sizes first. For small off-road ride issues, see our Kayo Fox 70 problems guide.
Final Thoughts on the Best Go Kart Jackshaft Kit
The right go kart jackshaft kit comes down to three matches: chain size, shaft diameter, and shaft length. Get those right, and the install goes smoothly. Get one wrong, and you will spend more time returning parts than riding. Measure twice, order once, and your kart will thank you.
The pinkhatcat 5/8-inch by 12-inch kit is our top pick for #40/41/420 chain. Choose the OEM-GT 3/4-inch kit for a thicker shaft, or the #35 kits for lighter builds. The 16-inch kit helps wide frames that need extra room for sprocket spacing and chain alignment.
Verify every bore and chain size before you order, and check each Amazon listing for current price and return terms. Use threadlocker, align carefully, and grease the bearings. With those habits, your jackshaft setup should deliver stronger launches, smoother power delivery, and many more trouble-free miles on the trail or track.
Leave a Reply